Home decoration, is it feasible to install floor heating in the living room as a radiator for the bedroom?

thumbnail

Today I want to talk to you about heating. When measuring the room in the morning, I communicated with the owner whether the floor should be heated or used as a radiator. The owner said that he wanted to use floor heating in the guest dining room and a radiator in the bedroom.

Does this approach work?

Let’s not give the answer first, you can think about it, who did this to the relatives and friends you have been to? I guess very few, if not none.

Since everyone does not do it, this shows that there is a problem with this approach.

Part of it is floor heating, and the other part is radiator, which may cause the radiator to not be hot.

Because water is also very “lazy”, whichever channel has less resistance, it will flow from which side, and where there is no water passing through, there will be no heat dissipation, and it will not be hot.

So, according to the conventional method, this method is not feasible, but then again, if you have to do it, will it work?

As long as the mind does not slip, there are always more solutions than difficulties, and there will be solutions when there is a need.

One side is floor heating, and the other side is radiator. If the main circuit is divided into two circuits, it will definitely not work.

To achieve this effect, the radiator must be controlled with a water divider.

The water divider can adjust the water flow, which can ensure that the amount of water leading to each road is the same. With the guarantee of the amount of water, whether it is the radiator or the floor heating, it will heat up.

Through this question, we can think more deeply. If radiators are installed in the house, the installation method is either in parallel or in series.

Either way, once there are too many radiators along the way, the last few radiators will not be hot.

If we also use the water divider method to directly pass the water to each radiator through the water divider, this effect must be very good, making each radiator hot.

But the only downside of this approach is that it uses more tubes and is more expensive.

Therefore, floor heating appeared, which solved the problem of uneven heat, and now more and more floor heating is used.

Finally, think about it again. If you use water in the kitchen at home and then release water from the bathroom, the amount of water will be significantly reduced. The reason for the reduction is that water is used at the same time. Can this problem be solved? I will tell you tomorrow.

Related Posts