The bathroom and kitchen have casement windows. Please note that it is possible that your home needs to smash the wall by the window.

This morning, I went to the construction site to check the water and electricity. There is no problem with the water pressure and electric potential. When I was looking at the kitchen, I found that the wall by the kitchen window was smashed. The owner said no, it was done by the demolition master a few days ago.

I called and asked our dismantling master, the master said he did it, and then came another question about dismantling wrong?

I said that there was no mistake in dismantling, and the dismantling was very good. The dismantling master said that he would not dismantle it now, and I would have to make a separate trip when the tiles were installed.

What the master said is right. Now it can be done by smashing a window for dozens of dollars. Let the master go alone. The minimum cost is 100. The bathroom and kitchen will cost a few hundred more. .

Through this matter, I will tell you the reason for smashing the window, if it is not good, your family needs it.

Smashing the window will happen in two types of work, the first is tiling, and the second is window covering.

In the past, many windows were push-pull, which did not involve the issue of opening window hinges, but now many windows are flat, with hinges, and many hinges are exposed.

The distance between the hinge and the window is too small, which is the reason for the smashing of the window.

After the tiles are installed normally, there must be at least one centimeter distance between the finished surface of the tiles and the window hinge, which can facilitate the opening of the window. The thickness of the tiles and cement mortar needs to be at least two centimeters, so the distance between the hinge and the window edge is theoretically greater than three centimeters.

Now, the distance between many hinges and the window edge is one or two centimeters. Once the tiles are pasted, the window cannot be opened freely.

In order to use the window normally in the later stage, if the distance between the hinge and the window edge is too close, it is necessary to smash the window edge by a few centimeters.

The window cover is also faced with this problem. Whether it is wood, marble, or stainless steel, the thickness of the final window cover and the base must be between 1.5-2 cm. Once the distance between the original window hinge and the window edge is less than 2 cm, after the window cover is installed, the window cannot be fully opened.

The wall tiles in the bathroom and kitchen must be laid. The window cover is not made by every household. If you do it at home, you should measure the distance between the window hinge and the window at the beginning of the dismantling stage. to smash. Dropping it early can save you worry, dropping it late will cost you money.