'Bulky belly' is a common problem of ceramic tiles, and the unevenness of the tiles is not necessarily the problem of the bricklayer.

Today, let’s talk about ceramic tiles. Ceramic tiles are necessary for every home decoration, and the amount is quite large, ranging from dozens of square meters to hundreds of square meters.

Now there are many types of ceramic tiles on the market, many brands, and the price difference is very large. For example, 600×1200 ceramic tiles of the same specification cost 30 to 40 yuan, and some 200 to 300 yuan. These ceramic tiles are not only due to the brand factor. Also, is the quality really the same?

If you think so too, you are wrong.

Most of the tiles on the market can be justified, but there are also a few tiles whose quality is quite poor.

Last year, a homeowner bought a tile, and the master bricklayer was worried when laying it. He didn’t use a rubber mallet and slapped it with the palm of his hand, but it was broken. If a hole is cut in the tile, the strength of the tile will be lower. It made the master not dare to post it.

Although this kind of situation is rare, I would like to remind everyone that you should not be greedy when buying ceramic tiles.

The quality of the tiles is mainly distinguished from two points. The first point is the embryonic material of the tile itself, which many owners cannot see, so we will skip this point. The second point is the flatness of the tiles. Many owners can’t see it, but they can feel it after the tiles are pasted.

Has the owner encountered the following situation? After the tiles were pasted, they went to the site for inspection and found that the middle part of the tiles was uneven, and they felt that they blocked the hand. Therefore, the owner felt that the tiles were not pasted well, and the level of the bricklayers was too poor.

Is this really the case? Probably not.

When this happens, don’t rush to a conclusion, first check whether the two sides of the tile and the other three tiles are flat, if the two sides of the tile are flat, only the middle is drum, and many of them are like this, which means that the tile “ Bulging belly”, that is, the tile itself is an arc. It is a bit difficult to lay such tiles flat. Although there are levelers now, they are not omnipotent.

“Bulky belly” is a common problem of ceramic tiles. The larger the size, the worse the flatness of the tiles. These tiles will not tell you.

If you want to make the tiles in your home look good and flat, choosing good quality tiles is a must. It is difficult for a clever woman to cook without rice. The price of tiles and the effect of paving are proportional. Although they are not completely correct, they are of reference significance.