The house that has just been installed for a year, but the door to the top cannot be opened, what should I do?

Answering a question from an owner today, the owner said that the whole house is customized at home, and it is one door to the top. It has been almost a year since the house was renovated last year. , I was going to move in in two months, but I found that many cabinet doors could not be opened, and the cabinet doors were blocked by the top surface. What should I do in this situation?

I asked the owner if there was no problem after the cabinet was installed. The owner said yes, after it was installed, he even tried it, and it can be opened freely.

The reason for this problem was found. This is because the door to the top of the cabinet has expanded, that is, the height of the cabinet door is several millimeters higher than the original.

When this problem occurs, it is necessary to ask the manufacturer of the whole house to lower the door panel. If the expansion coefficient is not high, it should be no problem to lower it by a few millimeters.

If it expands too much, it will be more troublesome. It is necessary to remove all the door panels and then find a new position. It is possible to re-open the original door panel.

If there is a problem, we must find the cause and solve it fundamentally to prevent similar things from happening.

There are two reasons for this situation. The first is that the quality of the door panel is too poor, and not all panels can be made from one door to the top.

Now there are too many manufacturers who customize the whole house, and the prices are also uneven. A flat wardrobe costs 700 yuan and a flat wardrobe costs more than 1,000 yuan. The final quality is the same, I don’t believe it.

To make a door-to-top door panel, you must use a good board, such as several imported brands that we are familiar with and several big domestic brands, these are all reliable.

The second reason is that the distance between the cabinet door and the top surface is too small after the cabinet door is installed. After the normal cabinet door is pressed, the distance from the top surface must be at least 3-5 mm.

But now some cabinet doors can barely be opened after they are installed, and it feels that the cabinet doors are very close to the top surface.

After the cabinet door is installed, the gap is small and it looks good, but the probability of problems in the later stage is also very high.

Therefore, after the cabinet door is installed, it must maintain a reasonable distance from the top surface. The cabinet door is of good quality and can be kept small. Generally, the quality of the cabinet door should be kept a little bigger.

The decoration of the home should be mainly practical, followed by beauty. If the order is wrong, it is easy to cause problems.